top of page

DeutschTuning proudly offers Dinan High Performance Heat Exchanger BMW M2/M3/M4 F8X .Heat is the enemy of performance. Keep temps down and performance will go up as a result of increased efficiency. It's really as simple as that. In stock trim, testing made it painfully obviously that cooling was going to hold an even more vital role on the F8x platform to achieve maximum results. The stock cooling system heat soaks after only 3 pulls and allows the engine air intake temperatures (IAT) to rise dangerously. The ECU must then reduce engine power to prevent detonation. With the Dinan high performance heat exchanger the vehicle does not heat soak even after 7 pulls; more than twice the effectiveness of a stock setup! Further testing focused on the heat exchanger produced the optimized design you see before you. With 60% more volume and 19% more face area than stock along with being a whopping 40mm thick (24mm thick stock) it becomes quickly apparent how heat soak is averted with the improved setup. While the unit could be physically thicker the 40mm dimension was ultimately chosen with consideration of airflow requirements of the main radiator which is located directly behind the heat exchanger. A thicker core would diminish airflow and sacrifice normal engine cooling which would be potentially detrimental to the long term health of the engine. The increased physical stature of the heat exchanger allows reduction in water temperatures to the intercooler an average of 9? across the RPM range. The colder water entering the intercooler then improves is efficiency and allows the intake air to be cooled by an additional 6? average across the RPM range compared to the stock unit. The reduction in intake air results in an impressive HP and ft-lb of torque gain without any changes in the engine tune. The cooling unlocks some significant additional power when paired with the stage 3 DINANTRONICS Performance Tuner.

 

Consistent HP/ft-lb of torque on the stock engine tune.

Additional gains realized when used in conjunction with the Stage 3 DINANTRONICS Tune.

60% more volume & 19% more face area than stock

40mm thick Dinan cooler vs. 24mm thick stock cooler

9F average water termperature reduction to the intercooler across the RPM range.

Colder water improves intercooler efficiency and allows the intake air to be cooled by an additional 6F average across the RPM range compared to stock.

Significant reduction in tendency to heat soak

Rubber mounted for vibration isolation

Track tested to ensure consistent performance under extreme conditions

Color/Finish: Silver Paint w/ Black Logo

Core Depth (in): 1.75

Core Length (in): 16.41

Core Width (in): 21

Inlet Inside Diameter (in): 0.51

Inlet Length (in): 1.489

Inlet Outside Diameter (in): 0.835

Inlet Quantity: 1

Material: Aluminum

Outlet Inside Diameter (in): 0.51

Outlet Length (in): 1.489

Outlet Outside Diameter (in): 0.835

Outlet Quantity: 1

Overall Height (in): 2.38

Overall Length (in): 17.25

Overall Width (in): 23.13

Package Contents: Heat Exchanger, Mounting Brackets & Bushings, Hardware

Dinan High Performance Heat Exchanger BMW M2/M3/M4 F8X

SKU: 100447
$745.00Price
  • -- BMW M3 (F80): Year 2015-2019

    -- BMW M4 (F82): Year 2015-2019

    -- BMW M2 (F87): Year 2015-2021

bottom of page